Description
These "boots" are intended to hold the foot in a fixed pointed position. The built in ankle cuff ensures that the wearer cannot take them off. The design of these boots is a bit different than regular ballet boots (which take the majority of the weight on the toe). These boots put pressure on the arch and the sole and are intended to leave the toe suspended or just touching the bottom of the boot, so that the toe doesn't take all the weight. These boots are still very difficult to walk in unless you have a lot of en pointe experience, so use at your own risk. It is best to use them in a seated or laying position.
*Cuffs are made from a heavy weight 3d printed PLA filament. They are extremely strong and durable. If you are close to a size cutoff, we recommend going up in size. These are hard cuffs with no room for adjustment.
**Each set will come with two different length attachments for the ankle cuff to the boot (one short and one long - you can determine which length works best for you by testing).
***Always engage in self bondage with others present. Make sure to test the cuffs out without wearing them before trying them on.
Bondage Webbing makes no assurance, expressed or implied, as to the safety of any of our products. All of our products are sold as novelties only. Furthermore, we accept no responsibility for injuries sustained while using our products. The purchaser assumes all risk and liability of use for all our products.